|
Product SKUs |
MBD-X7DVA-8-O | X7DVA-8 (Standard Retail Pack) |
MBD-X7DVA-8-B | X7DVA-8 (Bulk Pack) |
|
Physical Stats |
Form Factor | ATX |
Dimensions | 12" x 10" (30.5cm x 25.4cm) |
|
Processor/Cache |
CPU | - Dual 771-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence
- (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100/5000 sequence (Wolfdale)
- (Woodcrest/Dempsey processor) up to 3.40 GHz
|
System Bus | 1333 / 1066 / 667 MHz system bus |
Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
|
System Memory |
Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 24 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Memory must be populated in pairs
- No Memory Mirroring support
|
Memory Type | 667 / 533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 512 MB, 1GB, 2GB, 4GB |
Memory Voltage | |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
|
On-Board Devices |
Chipset | - Intel 5000V (Blackford VS) chipset
- MCH + ESB2
|
SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel SCSI supports up to four Ultra 320 hard drives
- Host RAID 0, 1, & 10 support
|
RAID | - Support for Zero-Channel RAID
- Optional: (card not included)
- RAID 0, 1, 5, 10
|
SATA | - Intel ESB2 SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows Only)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- (Optional: AOC-SIMLP-B(+))
- (Optional: AOC-SIMLP-3(+)) with 3rd LAN support
|
Network Controllers | - Intel (ESB2/Gilgal) 82563EB Dual-port Gigabit Ethernet controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
Graphics | ATI ES1000 controller with 16 MB of video memory |
Super I/O | Winbond 83627HG chip |
|
Input / Output |
SCSI | - Adaptec AIC-7902 Controller
- Dual-Channel Ultra320 SCSI supports up to 4 Ultra 320 drives
- Host RAID 0, 1, & 10 support
|
Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
IDE | - Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB |
LAN | 2x RJ45 LAN ports |
USB | - 2x USB rear ports
- 2x USB internal headers
- Total 6x USB 2.0 Compliant / 1.1 Compliant
|
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
Parallel Port | 1x ECP / EEP parallel port header |
|
Chassis ( Optimized for X7DVA-8 ) |
1U Chassis | - CSE-512F-280B
- CSE-512F-520B
- CSE-512F-520LB
- CSE-513L-420
- CSE-811i-410
- CSE-811S-520
- CSE-811TQ-280
- CSE-813MTQ-280C
- CSE-813MTQ-520C
|
2U Chassis | - CSE-823TQ-550LP
- CSE-823TQ-R500LP
|
Tower / 4 U Rackmount | - CSE-743S1-645
- CSE-743S1-650
- CSE-743S1-R760
- CSE-743S2-650
- CSE-743S2-R760
|
Important Chassis Notes | - To ensure system stability, use a 500W (minimum) ATX power supply
- [8-pin (+12V) and 24-pin are required]
|
|
Expansion Slots |
PCI-Express | - 1x (x8) PCI-e slot
- 1x (x4) PCI-e (using x8) slot
|
PCI-X | 2x 64-bit 100MHz PCI-X (3.3V) slots |
PCI | 1x 32-bit 33MHz PCI (3.3V) slot |
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
BIOS Features | - Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection
|
|
Management |
Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations | - ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on
|
|
PC Health Monitoring |
Voltage | - Monitors for CPU cores, +3.3 V, +5 V, ±12 V
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
FAN | - Total of six 4-pin fan headers supporting up to 6 fans
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 6x fan connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
|
LED | CPU / System Overheat LED |
Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 5/6, Server Exemption |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |
|
Regulatory |
FCC | Passed to meet FCC standard requirement |