|
Product SKUs |
SYS-5036I-IF | SuperServer 5036I-IF (Black) |
|
Motherboard |
Super X8SIL-F |
|
Processor/Cache |
CPU | - LGA 1156 Socket
- Intel Xeon X3400 series
- Intel Xeon L3400 series
- Intel® Core? i3
- Intel Pentium G6950
- Intel Celeron G1101
|
|
System Memory |
Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC registered memory (RDIMM)
- Supports up to 16 GB DDR3 ECC unbuffered memory (UDIMM)
- 1333 / 1066 / 800 MHz
- Dual Core processors of Core i3 and Pentium: support ECC UDIMM only
- NOTE: Supports 1 Gb and 2 Gb x8 devices only - Intel 3420 / 3400 chipset memory requirements
|
Note | - All X3400 series and L3426 CPU support RDIMM and UDIMM
- All i3 series, L3406, G6950, and G1101 CPU support UDIMM only
|
Memory Type | 1333 / 1066 / 800 MHz ECC registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
Memory Voltage | 1.5 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | |
SATA | - 6x SATA (3 Gb/s)
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
Network Controllers | - 2x Intel 82574L Gigabit Ethernet Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
VGA | Matrox G200eW 16MB DDR2 |
Super I/O | Winbond 83627DHG-P |
Clock Generator | CK505 |
|
Expansion Slots |
PCI-Express | - 2 (x8) PCI-E 2.0 slot
- 1x (x4) PCI-E (using x8 slot)
|
PCI | 1x 32-bit PCI slot |
|
Input / Output |
Serial ATA | 4 SATA hard drives supported |
LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | - 2x USB rear ports
- 1x USB on-board
- 2x USB internal header (4 ports)
- Total 7x USB 2.0 Compliant
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
|
System BIOS |
BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Chassis |
Form Factor | Mid-Tower |
Model | CSE-731i-300B |
|
Physical Features |
Height | 14.25" (362 mm) |
Width | 7.25" (184 mm) |
Depth | 16.75" (425 mm) |
Weight | 17.4 lbs (7.9 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
Ports | 2x Front side USB ports (USB 2.0 ready) |
|
Drive Bays |
Internal | 4x 3.5" tool-less HDD trays |
External | - 2x 5.25" external drive bays
- 1x 3.5" external drive bay (OEM option)
|
|
System Cooling |
Fans | - 1x 9 cm (rear) PWM fan w/ tool-less design
- 1x 8 cm (front) cooling fan (optional)
|
|
Power Supply |
300 W AC power supply w/ PFC |
AC Voltage | 100 - 240 V, 50-60 Hz, 5 A |
DC Output | 5 V + 12 V + 3.3 V - 12 V < 290 W |
+5 V | 19 A |
+5 V standby | 2.0 A |
+12 V | 11 A + 11.5 A |
-12 V | 0.15 A |
+3.3 V | 16.0 A |
Certification | Bronze Certified |
|
PC Health Monitoring |
CPU | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, ±12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375 V - 1.60 V
|
FAN | - Total of 5 fan headers supporting up to 5 fans
- Five 4-pin fan headers
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|