| |
Product SKUs |
| SYS-5035B-TB | SuperServer 5035B-TB (Black) |
| |
Motherboard |
| Super C2SBX |
| |
Processor/Cache |
| CPU | - Single LGA775 Socket
- Supports an Intel® Core?2 Extreme QX9000/QX6000 series processor (Exhaust Fan, FAN-0055, is required)
- Supports an Intel® Core?2 Quad Q9000/Q6000 series processor
- Supports an Intel® Core?2 Duo E8000/E7000/E6000/E4000 series processor
- Supports an Intel Pentium dual-core E2000 series processor
- Supports an Intel Celeron dual-core E1000 series processor
- Supports an Intel Celeron 400 series processor
|
| System Bus | 1333 / 1066 / 800 MHz system bus |
| |
System Memory |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800 MHz memory (Dual Channel)
|
| Memory Type | DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.5 V only |
| |
On-Board Devices |
| Chipset | |
| Serial ATA | - Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
|
| Network Controllers | - 1x Intel 82566 Gigabit PCI-Express Ethernet
- Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output
|
| Audio | High Definition 7.1 Channel Audio |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | ICS9LPRS511 |
| |
Expansion Slots |
| PCI-Express | - 2x (x16) PCI-e 2.0 slot
- 1 (x1) PCI-e slot
|
| PCI-X | 2x 64-bit 133 / 100MHz PCI-X (3.3V) slots |
| PCI | 2x 32-bit 33MHz PCI (5V) slots |
| |
Input / Output |
| Serial ATA | - Six Serial ATA ports (3 Gb/s performance)
- Six SATA hard drives supported
|
| IDE | - One EIDE channel supports up to two UDMA/IDE devices
- ITE8213F chipset
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 1x RJ45 LAN port |
| USB | - 12x USB 2.0 / 1.1 compatible
- 6 rear + 2 Type A connectors + 2 headers ( 4 ports )
|
| Audio | - High Definition 7.1 Channel Audio
- Line-in / Line-out / Microphone ports
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 2x Fast UART 16550 serial ports |
| Parallel Port | 1x ECP / EEP Parallel Port |
| Firewire | 1x Firewire IEEE 1394 Port |
| |
System BIOS |
| BIOS Type | - 16Mb Flash EEPROM with SPI BIOS
- Winbond W39V080FAP
|
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | Mid-Tower |
| Model | SC733TQ-465B |
| |
Physical Features |
| Height | 16.8" (427 mm) |
| Width | 7" (178 mm) |
| Depth | 20.9" (531 mm) |
| Weight | 39 lbs (17.7 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports | 2x Front side USB ports (USB 2.0 ready) |
| |
Drive Bays |
| Hot-Swap | 4x 3.5" SATA hot-swap drive bays |
| Peripheral Bay | - 2x 5.25" peripheral drive bay
- 1x 3.5" bay for floppy drive
|
| |
Peripheral Drives |
| Floppy | Teac Floppy Drive 3.5" 1.44 MB (Optional) |
| |
System Cooling |
| Fans | 1x 9.2cm Front Thermal Fan |
| |
SATA Backplane |
| 4 x 3.5" SATA Backplane |
| |
Power Supply |
| 465 W AC power supply w/ PFC |
| AC Voltage | 100 - 240 V, 50-60 Hz, 6-3 A |
| +5 V | 20 A |
| +5 V standby | 3 A |
| +12 V | 35 A |
| -12 V | 0.5 A |
| +3.3 V | 15 A |
| Certification | Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset
- CPU core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio
|
| FAN | - Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Status Monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5 V standby alert LED
|
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
|
0 Articoli
