| |
Product SKUs |
| SSG-6027R-E1R12L | SuperServer 6027R-E1R12L (Black) |
| |
Motherboard |
| Super X9DRD-7LN4F-JBOD |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 130 W TDP)
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602J chipset |
| SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1, 5, 10
|
| SAS | SAS-2 via LSI 2308; IT Mode/Pass-through |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel i350 Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW |
| |
Input / Output |
| Serial ATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4x SATA 2.0 ports (3 Gb/s)
|
| SAS | 8x SAS-2 ports (6 Gb/s) |
| LAN | - 4x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| JBOD | 1x JBOD Expansion Port |
| USB | - 9x USB 2.0 ports total
- (4x rear + 4x via header + 1x Type A)
|
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-826BE16-R920LPB |
| |
Dimensions |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 61 lbs (27.7 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
Expansion Slots |
| PCI-Express | 5x PCI-E 3.0 x8 slots (Low-Profile) |
| |
Drive Bays |
| Hot-Swap | 12x Hot-swap 3.5" SAS/SATA HDD trays |
| Optional OS drive | 2x Rear 2.5" Hot-swap Drive Bays |
| |
Backplane |
| SAS-2 / SATA-3 single expander per backplane |
| |
System Cooling |
| Fans | 3x 8cm 9.5K RPM, 4-pin PWM fans |
| |
Power Supply with Power Distributor |
| 920 W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I²C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
| DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
