| |
Product SKUs |
| SYS-8047R-TRF+ | SuperServer 8047R-TRF+ (Black) |
| |
Motherboard |
| Super X9QRi-F+ |
| |
Processor/Cache |
| CPU | - Intel Xeon processor E5-4600 v2 (12-Core)** or E5-4600 (8-Core) family
- (up to 130W CPU at 35°C)
- Quad Socket R (LGA 2011)
- ** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.
|
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 32x 240-pin DDR3 DIMM sockets
- Supports up to 1 TB DDR3 ECC registered memory (RDIMM) in 32 DIMM sockets
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel i350 Dual port GbE LAN
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW (Nuvoton WPCM450 BMC) |
| Super I/O | Nuvoton W83527HG |
| |
Input / Output |
| SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4x SATA 2.0 ports (3 Gb/s)
|
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x dedicated LAN port for IPMI
|
| USB | 4x USB 2.0 rear ports |
| Video | 1x VGA Port |
| Serial Port / Header | 1x Fast UART 16550 serial port |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit(MCP-290-00059-0B)
|
| Model | CSE-748TQ-R1K43B |
| |
Dimensions |
| Height | 18.2" (462mm) |
| Width | 7.0" (178 mm) |
| Depth | 28.4" (721mm) |
| Weight | - Net Weight: 65.5 lbs (29.7 kg)
- Gross Weight: 86.0 lbs (39.0 kg)
|
| Available Colors | Black |
| |
Drive Bays |
| Hot-Swap | - 5x 3.5" Hard Drive Bays
- Additional 5x 3.5" Drives available with optional M35 Mobile Rack
|
| Peripheral Bay(s) | 3x 5.25" Peripheral Drive Bays |
| |
Expansion Slots |
| PCI-Express | 4x PCI-E 3.0 x16 (2 in x8) Slots |
| |
Backplane |
- SAS/SATA HDD Backplane
- (SAS support requires optional SAS controller)
|
| |
System Cooling |
| Fans | - 3x 92mm RPM Hot-Swap Cooling Fans
- 3x 80mm RPM Hot-Swap Rear Exhaust Fan
|
| Shrouds | 1x Air Shroud |
| |
Power Supply |
| Redundant 1400 W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 |
| AC Voltage | 100-240 V, 50-60 Hz, 15 A max. |
| +12 V | - 100 A / 115 V ac
- 117 A / 230 V ac
|
| With Power Distributor | - +5 V: 30 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 10x fan connectors
|
| Other Features | Chassis intrusion detection |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
