| |
Product SKUs |
| SYS-6037R-TXRF | SuperServer 6037R-TXRF (Black) |
| |
Motherboard |
| Super X9DRX+-F |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1, 5, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Renesas SH7757 BMC
|
| Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | G200 (Renesas SH7757 BMC w/ graphic controller) |
| Super I/O | Nuvoton W83527 |
| |
Input / Output |
| Serial ATA | - 2x SATA 3.0 ports (6 Gb/s)
- 8x SATA 2.0 ports (3 Gb/s)
|
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 10x USB 2.0 ports total(4x rear + 4x via header + 2x Type A) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| |
Chassis |
| Form Factor | 3U Rackmount |
| Model | CSE-835XTQ-R982B |
| |
Dimensions |
| Width | 17.2" (437mm) |
| Height | 5.2" (132 mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 48.4 lbs (22.0kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
Expansion Slots |
| PCI-Express | - 10x PCI-E 3.0 x8
- 1x PCI-E 2.0 x4 (in x8)
|
| |
Drive Bays |
| Hot-Swap | 8x Hot-Swap 3.5" SAS / SATA HDD trays |
| Drive Bracket | Suppports 1x 3.5" or 2x 2.5" drives (internal) |
| |
Backplane |
| 1x SAS-2 / SATA backplane |
| |
System Cooling |
| Fans | - 3x 8cm 7K RPM, Middle fans
- 1x 8cm 6.7K RPM, Rear Exhaust fan
|
| |
Power Supply with Power Distributor |
| 850 W / 980 W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus |
| AC Input | - 100-140 V, 50-60 Hz, 11.5-6.5 A
- 180-240 V, 50-60 Hz, 6.5-4.5 A
|
| DC Output | - 4 A @ +5 V Standby
- 70 A @ +12 V (100-140 V ac)
- 81 A @ +12 V (180-240 V ac)
|
| With Power Distributor | - +5 V: 30 A
- +3.3 V: 28 A
- -12V: 0.6 A
|
| Certification | Platinum Level |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|