| |
Product SKUs |
| SYS-8028B-C0R4FT | SuperServer 8028B-C0R4FT (Black) |
| |
Motherboard |
| Super X10QBL-4CT |
| |
Processor/Cache |
| CPU | - IntelŽ XeonŽ processor E7-8800 v4/v3, E7-4800 v4/v3
- family
- (up to 24 Cores and 165W TDP)
- Quad Socket R1 (LGA 2011)
|
| Cache | Up to 60 MB |
| System Bus | QPI up to 9.6 GT/s |
| |
System Memory |
| Memory Capacity | - 32x 288-pin DDR4 DIMM slots
- Supports up to 4TB DDR4 ECC 3SDS LRDIMM in 32 DIMM slots
|
| Memory Type | 1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated DIMMs |
| DIMM Sizes | 128GB, 64GB, 32GB, 16GB, 8GB, 4GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| |
On-Board Devices |
| Chipset | Intel C602J chipset |
| SAS | SAS2 (6Gbps) Backplane via LSIŽ 3008 controller |
| SATA | - SATA2 (3Gbps) with RAID 0, 1, 5, 10
- SATA-3 (6 Gb/s) with RAID 0, 1
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| SAS | 8x SAS-2 ports (6 Gb/s) |
| LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
|
| USB | 3x USB 2.0 rear ports |
| Video | 1x VGA Port |
| Serial Port / Header | 1x Fast UART 16550 serial port |
| |
System BIOS |
| BIOS Type | 128MB SPI Flash EEPROM with AMIŽ BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-828TQ-R1K43LPB |
| |
Dimensions |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 27.9" (709 mm) |
| Weight | - Net Weight: 40 lbs (18.1 kg)
- Gross Weight: 66.5 lbs (30.2 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
Expansion Slots |
| PCI-Express | - 2x PCI-E 3.0 x16 Low-profile slot
- 2x PCI-E 3.0 x8 Low-profile slot
|
| |
Drive Bays |
| Hot-Swap | 6x 3.5" Hot-swap Drive Bays |
| |
Backplane |
| SAS/SATA HDD Backplane |
| |
Peripheral Drives |
| DVD-ROM | 1x Slim DVD-ROM (Optional) |
| |
System Cooling |
| Fans | 3x 8cm Hot-swap Cooling fans |
| Shroud | 1x Air Shroud |
| |
Power Supply |
| Redundant 1400 W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 |
| AC Voltage | 100-240 V, 50-60 Hz, 15 A max. |
| +12 V | - 100 A / 115 V ac
- 117 A / 230 V ac
|
| With Power Distributor | - +5 V: 30 A
- +3.3 V: 25 A
- -12V: 0.6 A
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 10x fan connectors
|
| Other Features | Chassis intrusion detection |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
