| |
Product SKUs |
| SYS-7048R-C1R | SuperServer 7048R-C1R (Black) |
| |
Motherboard |
| Super X10DRH-C |
| |
Processor/Cache |
| CPU | - IntelŽ XeonŽ processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Please contact your Supermicro sales representative for additional details. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | IntelŽ C612 Express chipset |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 |
| SAS | LSI 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Video | ASPEED AST2400 BMC |
| |
Input / Output |
| SATA | 8x SATA3 (6Gbps) ports |
| SAS | 8x SAS-3 (12 Gb/s) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2x USB 3.0 ports (2 rear)
- 4x USB 2.0 ports (2 rear, 2 front)
- 1x USB Type A
|
| Video | 1x VGA port |
| Serial Port / Header | 1x COM/Serial |
| DOM | 2x SuperDOM (Disk on Module) ports |
| |
Expansion Slots |
| PCI-Express | - 1x PCI-E 3.0 x16 (Full-height, Full-length)
- 6x PCI-E 3.0 x8 (Full-height, Full-length)
|
| |
System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Chassis |
| Form Factor | - 4U Rackmountable / Tower
- Optional Rackmount Kit
|
| Model | CSE-745TQ-R920B |
| |
Dimensions and Weight |
| Height | 17.2" (437mm) |
| Width | 7.0" (178 mm) |
| Depth | 25.5" (648 mm) |
| Package | 24" (H) x 14" (W) x 26.5" (D) |
| Weight | - Net Weight: 56.5 lbs (25.6 kg)
- Gross Weight: 74 lbs (33.57 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports | 2x USB Ports |
| |
Drive Bays |
| Hot-Swap | - 8x 3.5" Hot-swap SATA3 drive trays
- 8x 2.5" Hot-swap SAS3 drives in mobile rack
|
| Peripheral Bay | 1x 5.25" drive bay (optional devices) |
| |
SAS / SATA Backplane |
- SAS via backplane (BPN-SAS3-I28A) in Mobile rack
- SATA via chassis HDD Backplane CSE-SAS-743TQ-O-P
|
| |
System Cooling |
| Fans | - 3x 8cm Hot-swap redundant PWM Cooling Fans
- 2x 8cm Hot-swap Rear Exhaust PWM Fans & air shroud
|
| |
Power Supply with Power Distributor |
| 920 W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I˛C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
| DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
|
| FAN | - Total of five fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 5x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - System info. LED: UID indicator, fan fail/System Overheat
- Supsend-State Indicator LED
- UID/Remote LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
