| |
Product SKUs |
| SYS-6028TP-DNCR | SuperServer 6028TP-DNCR (Black) |
| |
Motherboard |
| Super X10DRT-P |
| |
Processor/Cache
(per Node)
|
| CPU | - IntelŽ XeonŽ processor E5-2600 v4/
- v3 family
- (up to 145W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| |
System Memory
(per Node) |
| Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM:
- 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| |
On-Board Devices |
| Chipset | IntelŽ C612 chipset |
| SAS | - LSI 3008 SAS-3 (12 Gb/s) controller;
- RAID 0, 1, 10 support
- Note: In order to support NVMe drives, both CPU socket must be populated
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output (per Node) |
| SAS | 6x SAS-3 (12 Gb/s) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 2x USB 3.0 ports total (2x rear) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header (internal) |
| Others | - 1x mSATA (full size) and one SATADOM support on the daughter card
- 1x SATADOM support on the motherboard
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-827HD+-R1K68B |
| |
Dimensions and Weight |
| Width | 17.25" (438mm) |
| Height | 3.47" (88mm) |
| Depth | 30.5" (774mm) |
| Weight | - Gross Weight: 85 lbs (38.6kg)
- Net Weight: 66 lbs (29.9 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- UID button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
Expansion Slots (per Node) |
| PCI-Express | - 1x PCI-E 3.0 x16 slot
- 1x PCI-E 3.0 x8 slot
|
| |
Drive Bays (per Node) |
| Hot-Swap | - 6x 3.5" Hot-swap drive bays:
- Up to 4x NVMe + 2x SAS3 or 6x SAS3
- Note: NVMe support requires 2 CPUs installed
|
| |
System Cooling |
| Fans | 4x 8 cm heavy duty PWM fans with optimal fan speed control |
| |
Power Supply (76mm Width) |
| 1600W Redundant Power Supplies with PMBus |
| Total Output Power | 800W/1600W |
| Dimension(W x H x L) | 76 x 40.4 x 336 mm |
| Input | - 100-140Vac / 10-7A / 50-60Hz
- 180-240Vac / 11-8A / 50-60Hz
|
| +12 V | - Max: 66A / Min: 0A (100-127Vac)
- Max: 133A / Min: 0A (200-240Vac)
|
| +5Vsb | Max: 1A / Min: 0A |
| Output Type | 27 Pairs Gold Finger Connector |
| Certification | UL/cUL/CB/BSMI/CE/CCC Titanium Level |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
