| |
Product SKUs |
| SYS-6025C-URB | - SuperServer 6025C-URB
- (Black)
|
| |
Motherboard |
| Super X7DCU |
| |
Processor/Cache |
| CPU | - Dual 771-pin LGA Sockets
- Supports up to Dual Intel 64-bit Xeonprocessor(s) of the same type below:
- Quad-Core Intel XeonProcessor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16 GHz
- Dual-Core Intel Xeon processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
|
| Operating System Software | - Supports 64-Bit Operating Systems
- Supports 32-Bit Operating Systems
|
| |
System Memory |
| Memory Capacity | - Six 240-pin DIMM sockets
- Supports up to 48 GB 667/533 MHz DDR2 ECC registered SDRAM
- Dual channel memory bus
- Memory must be populated in pairs
|
| Memory Type | 667/533 MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8 V only |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | - Intel 5100 (San Clemente) chipset
- Intel ICH9R
|
| SATA | - Intel ICH9R SB SATA-2 controller
- RAID 0, 1, 5, 10 support (Windows only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0 / 1.5
- 200-pin IPMI slot (SIMSO(+))
- (Optional: AOC-SIMSO(+))
|
| Network Controllers | - Intel 82575EB Dual-port Gigabit Ethernet controller w/ IOAT
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- Intel I/OAT support for fast, scaleable, and reliable networking
|
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | CK505 chip |
| |
Input / Output |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| IDE | - Single EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x rear + 1x Type A connector + 2x headers (3 Ports)
- 6 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1x Fast UART 16550 serial port |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0/3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | SC825TQ-R700U |
| |
Dimensions |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648 mm) |
| Gross Weight | 55 lbs (24.9kg) |
| Available Colors | Silver, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- Power fail LED
|
| Ports | 2x USB Ports + DB9 COM Port (optional) |
| |
Expansion Slots |
| Left Side | - 1x Universal I/O (UIO) Slot
- 3 (x8) PCI-E Slots (Full-height / Full-length)
|
| |
Drive Bays |
| Hot-Swap | - 8x 3.5" SATA Hot-swap drive trays
- Supports up to 6x SATA hard drives
|
| |
Peripheral Drives |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy | Slim 1.44MB Floppy Drive (Optional) |
| |
SATA Backplane |
| 1x 2U SATA backplane |
| |
System Cooling |
| Fans | 3x 80 mm 6300 RPM fans |
| Shroud | 1x Air Shroud |
| |
Power Supply |
| 700 W (1 + 1) Redundant AC-DC high-efficiency power supply w/ PFC |
| AC Voltage | 100 - 240 V, 60-50 Hz, 10 - 4 A |
| +5 V standby | 4 A |
| +12 V | 57 A |
| With Power Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores,VTT, +1.5V, +3.3V, +5V, 12V, +5 Stdby, VBAT
- CPU core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN | - Total of eight 4-pin fans
- 8x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support for 3-pins (w/ speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- UID
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
- SDDC
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
