|
Product SKUs |
SYS-6018U-TRT+ | SuperServer 6018U-TRT+ (Black) |
|
Motherboard |
Super X10DRU-i+ |
|
Processor/Cache |
CPU | - IntelŽ XeonŽ processor E5-2600 v3 family
- (up to 160W TDP **)
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | ** Please contact your Supermicro sales representative for additional details. |
|
System Memory |
Memory Capacity | - 24x 288-pin DDR4 DIMM sockets
- Up to 1.5TB ECC LRDIMM, 768GB ECC RDIMM
|
Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
Memory Voltage | 1.2 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
|
On-Board Devices |
Chipset | IntelŽ C612 Express chipset |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Connectivity | 2x 10GBase-T ports via AOC-UR-i2XT |
Graphics | ASPEED AST2400 BMC |
|
Input / Output |
SATA | 4x SATA-3 (6 Gb/s) ports |
LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 5x USB 3.0 ports(2 rear, 2 onboard header, 1 Type A) |
Video | 1x VGA Connector |
Serial Port | 1x Serial header |
DOM | 2x SATA DOM (Disk on Module) support with embedded power |
|
Management |
Software | - SuperDoctorŽ 5
- IntelŽ Node Manager 3.0
- Watch Dog
- NMI
- SMCBU and SMM
- Optional IPMI 1.5 / 2.0
|
Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-819UTQ-R750 |
|
Dimensions and Weight |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 30.6" (777 mm) |
Gross Weight | 48 lbs (21.8 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
|
Expansion Slots |
PCI-Express | - 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L)
- 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal)
- (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
|
Drive Bays |
Hot-Swap | 4x 3.5" Hot-swap drive bays |
|
System Cooling |
Fans | 4x heavy duty fans with optimal fan speed control |
Air Shroud | 1x Air Shroud |
|
Power Supply |
750W Redundant AC-DC Power Supplies, +12V/+12Vsb output |
AC Input | - 100-127Vac, 50-60Hz
- 200-240Vac, 50-60Hz
|
+12 V | - Max: 62.5A & Min: 0A (100Vac-127Vac)
- Max: 62.5A & Min: 0A (200Vac-240Vac)
|
12V SB | |
Certification | Platinum Level (Cert. in progress) |
|
PC Health Monitoring |
CPU | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
- CPU core 6-Phase-switching voltage regulator
|
FAN | - Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I˛C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
Other Features | SDDC Support |
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 5°C to 40°C (41°F to 104°F)
- Non-operating temperature: -40 °C to 60 °C (-40 °F to 140 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|