| |
Product SKUs |
| SYS-5086B-TRF | SuperServer 5086B-TRF (Black) |
| |
Motherboards |
| X8OBN-F (1) + X8OBN-CPU (4) + X8OBN-BR1 (2) |
| |
Processor/Cache |
| CPU | - Octal 1567-pin LGA Sockets
- Supports up to eight Intel Xeon 64-bit processor(s) of the same type below:
- Intel Xeon processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel Xeon processors E7-8800 family (10-core, codename Westmere-Ex) supported
|
| QPI | Up to 6.4 GT/s |
| |
System Memory |
| Memory Capacity | - 64x 240-pin DIMM sockets
- Supports up to 2048 GB DDR3 ECC reg. Memory
|
| Memory Type | 1333* / 1066 / 978 / 800MHz ECC registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB** |
| Memory Voltage | 1.5 V, 1.35 V** |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - 2x Intel 7500 (Boxboro-EX) chipset
- ICH10R
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| Network Controllers | - Intel 82576 Dual-Port Gigabit Ethernet controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW 16 MB DDR2 |
| Super I/O | Winbond 83527HG chip |
| |
Input / Output |
| LAN | 3x RJ45 LAN ports (1 for IPMI) |
| USB | Total of 8 USB 2.0 ports (2x rear, 4 via 2x internal headers, 2x Type A) |
| SATA | 6x SATA2 ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header
|
| VGA | 1x VGA port |
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | 5U Rackmountable |
| Model | CSE-758A-R2800B |
| |
Dimensions |
| Height | 8.6" (219mm) |
| Width | 17.2" (437mm) |
| Depth | 30" (762 mm) |
| Weight | Gross Weight: 176 lbs (79.83 kg) |
| Available Colors | Black |
| |
Drive Bays |
| Hot-Swap | 16x 2.5" HDDs |
| Peripheral Bay(s) | 2x 5.25" drives |
| |
Expansion Slots |
| PCI-Express | - 4x PCI-E 2.0 x16 + 2x PCI-E 2.0 x8 (in x16) or
- 10x PCI-E 2.0 x8 full-height, full-length slots
|
| |
System Cooling |
| Fans | - 4x Hot-Swap Cooling Fans
- 2x Hot-Swap Rear Exhaust Fan
|
| Shrouds | 4x CPU card air shrouds for SC758 |
| |
Power Supply |
| 2800W (2+2) Redundant 1400W high-efficiency power supply with PMBus |
| AC Input | - 1200 W: 100 - 140 V, 50 - 60 Hz, 10.5 - 14.7 A
- 1400 W: 180 - 240 V, 50 - 60 Hz, 7.2 - 9.5 A
|
| DC Output +5 V standby | 6 A |
| DC Output +12 V | - 100 A @ 100-140 V
- 117 A @ 180-240 V
|
| Certification | Gold Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - 10x 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 10x fan connectors
|
| Other Features | Chassis intrusion detection |
| |
Operating Environment / Compliance |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
