| |
Product SKUs |
| SYS-5025M-i+ | SuperServer 5025M-i+ (Beige) |
| SYS-5025M-i+B | SuperServer 5025M-i+B (Black) |
| |
Motherboard |
| Super PDSME+ |
| |
Processor/Cache |
| CPU | - Single LGA775 ZIF Socket
- Supports an Intel Xeon 3200 Series Quad-core processor
- Supports an Intel Xeon 3000 Series (Conroe) Dual-core processor
- Supports an Intel Pentium D dual-core processor
- Supports an Intel Pentium Extreme Edition processor
- Supports an Intel Pentium 4 processor
- Supports an Intel Celeron D processor
- Hyper-Threading (HT) capable
|
| System Bus | 1066 / 800 / 533 MHz system bus |
| |
System Memory |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of memory (Single / Dual Channel)
|
| Memory Type | DDR2 667/533 MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| Chipset | - Intel 3010 (Mukilteo-2P) chipset
- ICH7R + PXH + Intel 82573V + Intel 82573L
|
| Serial ATA | - Intel ICH7R SATA controller built-in (3 Gb/s)
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM over LAN support
- SIM1U Slot - Supermicro Intelligement Management
- (Optional: AOC-SIM1U+)
|
| Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel 82573V + Intel 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
| VGA | On-board ATI ES1000 (16MB) graphics |
| Super I/O | Winbond 83627HG chip |
| Clock Generator | CK410 |
| |
Input / Output |
| Serial ATA | - Four SATA ports (3 Gb/s performance)
- Four SATA hard drives supported
|
| IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - Up to 4x USB 2.0 / 1.1 compliant ports
- 2x rear ports
- 1 internal header for 2 ports
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
| Parallel Port | 1x internal header for ECP / EPP parallel port |
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- SMBIOS 2.3
- USB Keyboard support
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | SC823i-550LP |
| |
Dimensions |
| Height | 3.5" (89mm) |
| Width | 16.8" (426 mm) |
| Depth | 25.6" (650mm) |
| Gross Weight | 55 lbs (24.9kg) |
| Available Colors | Beige, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
Expansion Slots |
| PCI-Express | - 1x (x4) PCI-e slot
- 1x (x8) PCI-e slot
|
| PCI-X | - 2x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| |
Drive Bays |
| Internal | 2x Internal 3-Hard Drive carriers (for total of 6 HDD support) |
| Peripheral Bay(s) | 1x 5.25" full-height peripheral bay |
| |
Peripheral Drives |
| Floppy | Panasonic 3.5" 1.44 MB Floppy Drive |
| CD-ROM | Slim 24x CD-ROM Drive |
| |
System Cooling |
| Fans | 4x 80 mm 6300 RPM fans |
| |
Power Supply |
| 550W power supply with PFC[ 24-pin, (8-pin, 4-pin)=12V ] |
| AC Voltage | 100 - 240V, 47-63Hz, 9/3.5 A |
| DC Output | +5V & +3.3V : Max = 50A |
| +5 V | 35.0 A |
| +5 V standby | 2.0 A |
| -5V | 0.8 A |
| +12 V | 42.0 A |
| -12 V | 1.0 A |
| +3.3 V | 30.0 A |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, 12V, +5V Standby, VBAT)
- CPU core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
| FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Status monitor for on/off control
- Supports 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) Support
|
| LED | - CPU / System Overheat LED
- Standby alert LED
- Supsend-State Indicator LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
0 Articoli
