| |
Product SKUs |
| SYS-5017C-LF | SuperServer 5017C-LF (Black) |
| |
Motherboard |
| Super X9SCL-F |
| |
Processor/Cache |
| CPU | - Intel Xeon processor E3-1200 & v2 series, Intel 2nd Gen and 3rd Gen Core i3, Intel Pentium and Celeron processors *
- ^
- Socket H2 (LGA 1155)
|
| |
System Memory |
| Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1600*/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C202 PCH chipset |
| SATA | 6x SATA 2.0 (3 Gb/s) w/ RAID 0, 1, 5, 10 |
| Network Controllers | - Intel 82579LM and Intel 82574L, 2x Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA | Nuvoton WPCM450RA0BX |
| Super I/O | Nuvoton NCT6776F |
| |
Input / Output |
| Serial ATA | - 6 SATA 2.0 ports
- Up to 2 SATA hard drives supported
|
| LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2x USB rear ports
- 1x USB Type-A
- 6x USB ports via header
- Total 9x USB 2.0 Compliant
|
| VGA | 1x VGA port |
| Serial Port / Header | 2x Fast UART 16550 serial ports (one header and one rear port) |
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-510L-200B |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 11.3" (287 mm) |
| Gross Weight | 11 lbs (4.99 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
Expansion Slots |
| PCI-Express | 1x PCI-E 3.0* x8 Low-Profile slot |
| |
Drive Bays |
| HDD | - 1x 3.5" or optional 2x 2.5" internal SATA2
- Hard Drive bays
|
| |
Peripheral Drives |
| |
Backplane |
- SAS/SATA HDD Backplane
- (SAS support requires optional SAS controller)
|
| |
System Cooling |
| Fans | 2x 8500 RPM 40x28mm PWM cooling fans |
| |
Power Supply |
| 200 W Low Noise AC-DC power supply with PFC |
| AC Voltage | 100 - 240 V, 50-60 Hz, 3-1.5 A Max |
| +5 V | 16.0 A |
| +5 V standby | 2.0 A |
| +12 V | 15.0 A |
| -12 V | 0.8 A |
| +3.3 V | 17.0 A |
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
