| |
Product SKUs |
| SYS-5016T-MRB | SuperServer 5016T-MRB (Black) |
| |
Motherboard |
| Super X8STi |
| |
Processor/Cache |
| CPU | - LGA 1366 Socket
- Intel Xeonprocessor 5600 Series (Westmere)
- Intel Xeonprocessor 5500 Series (Nehalem-EP)
- NOTE: Intel Xeon 3500 Series and Core i7 are Not Supported (Max TDP > 100 Watts)
|
| System Bus | QPI (up to 6.4 GT/s) |
| |
System Memory |
| Memory Capacity | - Supports up to 24 GB 1333 / 1066 / 800 MHz DDR3 ECC / non-ECC unbuffered memory
- Three Channel memory bus
- 6 DIMM sockets
|
| Memory Type | 1333 / 1066 / 800MHz unbuffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel X58 Express chipset
- ICH10R
|
| SATA | - Intel ICH10R SATA (3.0 Gb/s) controller
- RAID 0 support
|
| VGA | Integrated Graphics |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| |
Expansion Slots |
| PCI-Express | - 1x (x16) PCI-E 2.0 slot via riser card
- AOC Compatibility Matrix
|
| |
Input / Output |
| Serial ATA | - 6 SATA ports
- 6 SATA hard drives supported
|
| Floppy | 1x Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 2x USB on-board
- 2x USB internal header(4 ports)
- Total 8x USB 2.0 Compliant
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x internal header
|
| |
System BIOS |
| BIOS Type | 4 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | SC512-200B |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 16.8" (426 mm) |
| Depth | 14.0" (356 mm) |
| Gross Weight | 17 lbs (7.7kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| Ports | 2x USB Ports (2.0 Ready) |
| |
Drive Bays |
| Internal Bay | 1x 3.5" internal SATA drive bay |
| |
System Cooling |
| Fans | 1x 100mm blower fan |
| |
Power Supply |
| 200 W Low Noise High-Efficiency AC-DC power supply w/ PFC |
| AC Voltage | 100 - 240 V, 50-60 Hz, 4-2 A Max |
| +5 V | 8.0 A |
| +5 V standby | 2.0 A |
| +12 V | 16.0 A |
| -12 V | 0.5 A |
| +3.3 V | 8.0 A |
| Certification | Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +1.8V, +3.3V, +5V, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator with auto-sense from 0.8375 V-1.60 V
|
| FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - CPU / System Overheat LED
- +5 V Standby alert LED
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
