| |
Product SKUs |
| SYS-5015TB-TB | SuperServer 5015TB-TB (Black) |
| |
Motherboards |
| Super X7SBT + Super X7SBT |
| |
Processor/Cache |
| CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel Core 2 Quad Q9000/Q8000/Q6000 series
- Supports Intel Core 2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
- NOTE: 1600 MHz CPU has to use 1600 MHz XMP memory
|
| System Bus | 1600 / 1333 / 1066 / 800 MHz system bus |
| |
System Memory (per Node) |
| Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800 MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600 MHz XMP DDR3 memory
|
| Memory Type | DDR3 1333/1066/800 MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600 MHz XMP DDR3 memory |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | Dynamic (1.5V to 1.9V) |
| |
On-board Devices (per Node) |
| Chipset | - Intel X48 chipset
- ICH9R + Intel 82573V + Intel 82573L
|
| Serial ATA | - Intel ICH9R SATA-2 controller built-in (3 Gb/s)
- RAID 0, 1, 5, 10 (Windows)
- RAID 0, 1, 10 (Linux)
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM over LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
| Network Controllers | - Intel 82573V & 82573L Gigabit Ethernet controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| VGA | On-board XGI Volari Z9S (32MB) graphics |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | IDT CV152 |
| |
Input / Output (per Node) |
| Serial ATA | - Four SATA ports (3 Gb/s performance)
- Four SATA hard drives supported
|
| LAN | 2x RJ45 LAN ports |
| USB | - Up to 8x USB 2.0 / 1.1 compliant ports
- 2x rear ports + 2x internal headers + 2x Type A ports
|
| VGA | 1x VGA port |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x internal header
|
| |
System BIOS (per Node) |
| BIOS Type | 16Mb Flash EEPROM with Phoenix BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 / 2.0 (S3 Optional)
- ACPI 1.0 (limited)
- USB Keyboard support
- Hardware BIOS Virus protection
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-808LT-780B |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (705 mm) |
| Gross Weight | 40 lbs (18.1 kg) |
| Available Colors | Black |
| |
Front Panel (per Node) |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| |
Expansion Slots (per Node) |
| PCI-Express | 1x (x16) PCI-e 2.0 slot (Low-Profile) |
| |
Drive Bays (per Node) |
| Hot-Swap | 2x 3.5" SATA Hot-swap drive bays |
| |
SATA Backplane |
| 1U SATA Backplane |
| |
System Cooling |
| Fans | 6x Cooling Fans |
| |
Power Supply |
| 780 W AC to DC power supply w/ PFC |
| AC Input | 100-240 V, 60-50 Hz, 9.5-3.5 A |
| +5 V sb | 4 A |
| +12 V | - 65 A @ 180-240 V ac
- 58 A @ 100-140 V ac
|
| |
Management |
| Software | - SuperDoctor® III
- Watch Dog
- NMI
|
| Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Keyboard wakeup from soft-off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
| |
PC Health Monitoring (per Node) |
| CPU | - Monitors for CPU Cores ( +1.8V, +3.3V, +5, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU core 5-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
| FAN | - Total of three 4-pin fan headers
- 3x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
