|
Product SKUs |
SYS-5015B-NTRB | SuperServer 5015B-NTRB (Black) |
|
Motherboard |
Super X7SBU |
|
Processor/Cache |
CPU | - Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel Core 2 Quad Q9000/Q8000/Q6000 series
- Supports Intel Core 2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
- NOTE: 1600 MHz CPU has to use 1600 MHz XMP memory
|
System Bus | 1600 / 1333 / 1066 / 800 MHz system bus |
|
System Memory |
Memory Capacity | - Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800 MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600 MHz XMP DDR3 memory
|
Memory Type | DDR3 1333/1066/800 MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600 MHz XMP DDR3 memory |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | Dynamic (1.5V to 1.9V) |
|
On-Board Devices |
Chipset | - Intel X48 chipset
- ICH9R + Intel 82573V + Intel 82573L
|
Serial ATA | - Intel ICH9R SB SATA controller built-in (3 Gb/s)
- RAID 0, 1, 5, 10 (Windows Only)
- RAID 0, 1, 10 support(Linux)
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN & optional KVM over LAN support
- SIMSO Slot - Supermicro Intelligement Management
- (Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
- NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
|
Network Controllers | - 2x Single-port Gigabit PCI-Express Ethernet Controllers
- Intel 82573V + Intel 82573L
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
VGA | On-board ATI ES1000 (32MB) graphics |
Super I/O | Winbond 83627HG chip |
Clock Generator | IDTCV183-1 |
|
Input / Output |
Serial ATA | - Six Serial ATA ports (3 Gb/s performance)
- Six SATA hard drives supported
- External SATA supported
|
IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy | 1x Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | - Up to 8x USB 2.0 / 1.1 compliant ports
- 2x rear ports + 2x Type A connectors + 2x internal headers (4 ports)
|
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 2x Fast UART 16550 serial port
- 1x internal header
|
|
System BIOS |
BIOS Type | 16Mb Flash EEPROM with SPI BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0 / 2.0 (S3 Optional)
- USB Keyboard support
- SMBIOS 2.3
- RTC (Real Time Clock) Wakeup
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-815TQ-R450UB |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 25.6" (650mm) |
Gross Weight | 40 lbs (18.1 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- UID LED
|
Ports | - 2x USB & DB9 COM port tray
- (optional - in place of floppy drive)
|
|
Drive Bays |
Hot-Swap | 4x 3.5" Hot-swap drive bays |
|
System Cooling |
Fans | 3x Counter-rotating Fans |
|
Power Supply |
450 W (1 + 1) Redundant AC power supply w/ PFC |
AC Voltage | 100 - 240 V, 60-50 Hz, 6.3-3.2 A |
+5 V | 25 A |
+5 V standby | 3 A |
+12 V | 37 A |
-12 V | 0.6 A |
+3.3 V | 25 A |
|
PC Health Monitoring |
CPU | - Monitors for CPU Cores ( +1.8V, +3.3V, +5, 12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
- CPU core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
|
FAN | - Total of six 4-pin fan headers
- 6x fans with tachometer monitoring
- Status Monitor with firmware / software speed control
- Supports 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
LED | - CPU / System Overheat LED
- Supsend-State Indicator LED
- +5 V Standby power alert LED
- UID / Remote UID
|
Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 5/6, Server Exemption |
Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|