|
Product SKUs |
SYS-5015A-H | SuperServer 5015A-H(Black) |
|
Motherboard |
Super X7SLA-H |
|
Processor/Cache |
CPU | Intel Atom 330 Dual-Core 1.6 GHz processor |
System Bus | 533 MHz system bus |
|
System Memory |
Memory Capacity | - Two 240-pin DIMM sockets
- Supports up to 2 GB of unbuffered, non-ECC DDR2 667*/533/400 MHz memory (Single / Dual Channel)
|
Memory Type | DDR2 667*/533/400 MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
Chipset | - Intel 945GC + ICH7R
- Realtek RTL8111C-GR
|
SATA | - Intel ICH7R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
Network Controllers | - 2x Realtek RTL8111C-GR Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
Graphics | On-board GMA950 video |
Super I/O | Winbond 83627DHG-P chip |
Clock Generator | CK505 |
|
Input / Output |
Serial ATA | Four SATA ports ( 3 Gb/s ) |
IDE | - One EIDE channel supports up to two UDMA/IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
LAN | 2x RJ45 LAN ports |
USB | - 8x USB 2.0 / 1.1 compatible
- 2x rear + 3 headers (5 ports) + 1 Type A connector
|
VGA | Intel GMA950 |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Ports | - 1x Fast UART 16550 serial port
- 1x Serial Header
|
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.3
|
|
Drive Bays |
Internal Bay | - 1x 3.5" Internal Drive Bay (Standard)
- OR 2x 2.5" Internal Drive (optional)
- OR 1x 2.5" Internal Drive (optional)
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-502L-200B |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 9.8" (249 mm) |
Gross Weight | 10 lbs (4.5 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
I/O Ports | - Standard System I/O
- (Mouse, Keyboard, 2x USB Video, COM, LPT, LAN)
|
|
Power Supply |
200 W Low Noise AC-DC power supply with PFC |
AC Voltage | 100 - 240 V, 50-60 Hz, 3-1.5 A Max |
+5 V | 16.0 A |
+5 V standby | 2.0 A |
+12 V | 15.0 A |
-12 V | 0.8 A |
+3.3 V | 17.0 A |
|
PC Health Monitoring |
CPU | - Monitors for CPU cores, +3.3 V, +5 V, +12 V, +3.3 V Standby, VBAT, Memory, chipset
- CPU core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
FAN | - Total of four 4-pin fan headers
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status Monitor for on / off control
- Supports 3-pin fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4 x Fan Connectors
- I²C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
|
LED | CPU / System Overheat LED |
Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6, Pb Free |
Environmental Specifications | - Operating Temperature: 0° to 50 °C
- Non-operating temperature: -40° to 70 °C
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|