| |
Product SKUs |
| SYS-4027GR-TRT | SuperServer 4027GR-TRT (Black) |
| |
Motherboard |
| Super X9DRG-OTF-CPU |
| |
Processor/Cache |
| CPU | - Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 150W TDP **)
- Dual Socket R (LGA 2011)
|
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| Note | ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
| |
System Memory |
| Memory Capacity | - 24x 240-pin DDR3 DIMM sockets
- Up to 1.5 TB DDR3 ECC LRDIMM
- Up to 768 GB DDR3 ECC RDIMM
- Up to 192 GB DDR3 ECC/non-ECC UDIMM
|
| Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
- Supports ECC and non-ECC UDIMMs
|
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| AHCI SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
| SCU SATA | SATA 2.0 3 Gb/s with RAID 0, 1, 10 |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T
- , 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| Graphics | Matrox G200 (Nuvoton WPCM450 BMC) |
| Super I/O | Nuvoton W83527HG |
| |
Input / Output |
| AHCI SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4x SATA 2.0 ports (3 Gb/s)
|
| SCU SATA | 4x SATA 2.0 ports (3 Gb/s) |
| LAN | - 2x RJ45 10GBase-T ports
- 1x dedicated LAN port for IPMI
|
| USB | 10x USB 2.0 ports total(4x rear + 4x via header + 2x Type A) |
| Serial Port / Header | 1x Fast UART 16550 ports: 1 header |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | - 4U Rackmountable
- Rackmount Kit (MCP-290-00057-0N)
|
| Model | CSE-418GTS-R3200B |
| |
Dimensions |
| Height | 7.0" (178 mm) |
| Width | 17.2" (437mm) |
| Depth | 29" (737 mm) |
| Weight | - Net Weight: 80 lbs (36.2 kg)
- Gross Weight: 135 lbs (61.2 kg)
|
| Available Colors | Black |
| |
Drive Bays |
| Hot-Swap | 24x 2.5" Hard drive bays |
| |
Expansion Slots |
| PCI-Express | - 8x PCI-E 3.0 x16 (double-width) slots
- 2x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 2.0 x4 (in x16) slot
- li>
|
| |
Backplane |
| SAS/SATA HDD Backplane |
| |
System Cooling |
| Fans | 8x 92mm RPM Hot-Swap Cooling Fans |
| Shrouds | - 1x Air Shroud (MCP-310-84806-0B)
- 1x Air Shroud (MCP-310-84807-0B)
|
| |
Power Supply |
| 1000W/1600W 1U Redundant Power Supply |
| AC Input | - 1000W @ 100-127V, 12.9A Max., 50-60Hz
- 1600W @ 200-240V, 9.5A Max., 50-60Hz
|
| DC Output | - 1000W: +12V/82A; +12Vsb/2A
- 1600W: +12V/132A; +12Vsb/2A
|
| Certification | Platinum Level (Cert. in progress) |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.2 V, 1.5 V, +3.3 V, +12 V, (+3 V, 1.0 V, 1.2 V, 1.8 V, 1.1 V) Standby, VBAT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator with auto-sense from 0.6 V-1.35 V
|
| FAN | - 4-pin fan headers with tachometer status monitoring
- Low noise fan speed control mode
|
| Temperature | - Monitoring for CPU and system environment
- Thermal Control for 8x fan connectors
|
| Other Features | Chassis intrusion detection |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
