| |
Product SKUs |
| SYS-2028UT-BTNRT | SuperServer 2028UT-BTNRT (Black) |
| |
Motherboard |
| Super X10DBT-T |
| |
Processor/Cache |
| CPU | - Dual Socket R1 (LGA 2011)
- Intel Xeon processor E7-8800 v2 / E7-4800 v2 / E7-2800 v2 (up to 15 Cores and 155 W)
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 37.5MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 32x 240-pin DDR3 DIMM sockets
- Up to 2 TB DDR3 ECC LRDIMM
- Up to 1 TB DDR3 ECC registered memory (RDIMM)
|
| Memory Type | 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | - 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB
- LRDIMM 64GB
|
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T controller
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| SATA-3 | - Customizable storage
- 8x SATA 3.0 ports (6 Gb/s)
|
| LAN | - 2x RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 2x USB 2.0 ports total (2x rear) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port / 1 Header |
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-227HD-R1K28B |
| |
Dimensions and Weight |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 28.6" (726mm) |
| Gross Weight | 50 lbs (22.7 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
- UID button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| |
Expansion Slots |
| PCI-Express | - 2x PCI-E 3.0 x16 slots (FH/HL)
- 1x PCI-E 3.0 x8 MicroLP card
|
| |
Drive Bays |
| Hot-Swap | 8x Hot-Swap 2.5" SATA-3 HDD bays |
| NVMe | 2x NVMe drive bays |
| |
Backplane |
| 1x SAS/SATA Backplane |
| |
Peripheral Drives |
| DVD-ROM | Slim DVD-ROM drive (optional) |
| |
System Cooling |
| Fans | 4x 80 mm 4-pin PWM fans |
| |
Power Supply |
| 1280 W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
| AC Input | - 1000 W Output @ 100-140 V, 12-8 A, 50-60 Hz
- 1280 W Output @ 180-240 V, 8-6 A, 50-60 Hz
|
| DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1280 W: +12 V / 106.7 A, +5V sb / 4 A
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- BIOS resuce hot keys
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
