| |
Product SKUs |
| SYS-2028GR-TRH | SuperServer 2028GR-TRH (Black) |
| |
Motherboard |
| Super X10DRG-H |
| |
Processor/Cache |
| CPU | - IntelŽ XeonŽ processor E5-2600 v3 family
- (up to 145W TDP **)
- Dual Socket R3 (LGA 2011)
|
| Cores / Cache | Up to 18 Cores / Up to 45MB Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | ** Please contact your Supermicro sales representative for additional details. |
| |
System Memory |
| Memory Capacity | - 16x 288-pin DDR4 DIMM sockets
- Up to 1TB ECC LRDIMM, 512GB ECC RDIMM
|
| Memory Type | 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | - RDIMM: 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
|
| Memory Voltage | 1.2 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | IntelŽ C612 Express chipset |
| SATA | - Intel C612 Controller
- SATA3 (6Gbps) with RAID 0, 1, 5, 10
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
| Network Controllers | - Intel i350 Dual port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Graphics | ASPEED AST2400 BMC |
| |
Input / Output |
| SATA | 10x SATA3 (6Gbps) ports |
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 4x USB 3.0 ports (2 rear, 2 via header)
- 2x USB 2.0 ports (2 via headers)
|
| Video | 1x VGA Connector |
| Serial Port | 1x Serial header |
| |
System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-218GH-R2K03B |
| |
Dimensions and Weight |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 31" (787mm) |
| Package | 26.5" (H) x 11" (W) x 44.5" (D) |
| Weight | - Net Weight: 39.5 lbs (17.9 kg)
- Gross Weight: 54 lbs (24.5 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
| |
Expansion Slots |
| PCI-Express | - 6x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards, optional)
- 1x PCI-E 3.0 x8 (in x16) Low-Profile slot
|
| |
Drive Bays |
| Hot-Swap | 10x 2.5" Hot-Swap drive bays |
| |
System Cooling |
| Fans | 5x 8 cm heavy duty fans with optimal fan speed control |
| |
Power Supply |
| 2000W 1U Redundant Power Supply |
| AC Input | - 1000W @ 100-120V, 12.5A Max., 50-60Hz
- 2000W @ 200-240V, 10A Max., 50-60Hz
|
| DC Output | - 1000W: +12V/83.3A; +12Vsb/3.5A
- 2000W: +12V/166.7A; +12Vsb/3.5A
|
| Certification | Platinum Level (Cert. in progress) |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
- CPU core 6-Phase-switching voltage regulator
|
| FAN | - Total of five 4-pin PWM fans
- 5x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I˛C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
| Other Features | SDDC Support |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
