| |
Product SKUs |
| SYS-2016Ti-HTRF | SuperServer 2016Ti-HTRF (Black) |
| |
Motherboard |
| 4x Super X8SIT-HF |
| |
Processor/Cache |
| CPU | - LGA 1156 Socket
- Intel Xeon X3400 series
- Intel Xeon L3400 series
- Intel Core i3
- Intel Pentium G6950
- Intel Celeron G1101
|
| |
System Memory |
| Memory Capacity | - 6x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC registered memory (RDIMM) in 6 DIMM sockets
- Supports up to 16 GB DDR3 ECC unbuffered memory (UDIMM) in 4 DIMM sockets
- 1333 / 1066 / 800 MHz
- Dual Core processors of Core i3 and Pentium: support ECC UDIMM only
|
| Memory Type | 1333 / 1066 / 800 MHz ECC registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel 3420 chipset |
| SATA | - 6x SATA (3 Gb/s)
- RAID 0, 1, 5, 10 support (Windows)
- RAID 0, 1, 10 support (Linux)
|
| Network Controllers | - High Performance Intel 82576BE Dual Port Gigabit LAN
- Virtual Machine Device Queues High efficient I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Nuvoton W83627DHG UBE |
| |
Input / Output (per Node) |
| Serial ATA | - Six Serial ATA ports
- 6 SATA hard drives supported
|
| LAN | - 2x RJ45 LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | - 2x rear + 1x header (2x Ports)
- 4 total USB ports, 2.0 Compliant / 1.1 Compliant
|
| VGA | 1x VGA Port |
| Serial Port | 1x Fast UART 16550 serial port |
| |
System BIOS (per Node) |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-217HQ-R920B |
| |
Dimensions |
| Height | 3.47" (88mm) |
| Width | 17.25" (438mm) |
| Depth | 28.5" (724 mm) |
| Gross Weight | 85 lbs (38.6kg) |
| Available Colors | Black |
| |
Front Panel (per Node) |
| Buttons | - Power On/Off button
- UID button
|
| LEDs | - Power status LED
- UID LED
- Network activity LED
- System overheat/fan fail/power fail LED
|
| |
Expansion Slots (per Node) |
| PCI-Express | 1x Low-Profile PCI-E (x16) AOC slot |
| |
Drive Bays (per Node) |
| Hot-Swap | - 6x 2.5" Hot-Swap SATA drive bays
- Enterprise SATA HDD only recommended
|
| |
System Cooling |
| Fans | 4x 80 mm PWM cooling fans |
| |
Power Supply with Power Distributor |
| 920 W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I²C |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
| DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
| With Power Distributor | +5 V: 30 A |
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
- CPU core 6-Phase-switching voltage regulator
|
| FAN | - Total of four 4-pin PWM fans
- 4x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
