|
Product SKUs |
SYS-1027GR-TRT2 | SuperServer 1027GR-TRT2 (Black) |
|
Motherboard |
Super X9DRG-HTF+II |
|
Processor/Cache |
CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600 and E5-2600 v2 family?
- (up to 130 W TDP)
|
Note | ? BIOS version 3.0 or above is required |
Cache | Up to 30 MB |
System Bus | QPI up to 8 GT/s |
|
System Memory |
Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC and non-ECC UDIMM
|
Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
Memory Voltage | 1.5 V, 1.35 V |
Error Detection | - Corrects single-bit errors
- Detects double-bit errors
- (using ECC memory)
|
|
On-Board Devices |
Chipset | Intel C602 chipset |
SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
Graphics | Nuvoton WPCM450 BMC |
|
Input / Output |
SATA | - 2x SATA-3 (6 Gb/s) ports
- 2x SATA2 (3Gbps) ports
|
LAN | - 2x RJ45 10GbE ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 2x USB 2.0 ports |
Video | 1x VGA Connector |
Serial Port | 1x Serial header |
|
System BIOS |
BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI
|
|
Chassis |
Form Factor | 1U Rackmount |
Model | CSE-118GH-R1K66B |
|
Dimensions |
Height | 1.7" (43 mm) |
Width | 17.2" (437mm) |
Depth | 30.6" (777 mm) |
Gross Weight | 48 lbs (21.8 kg) |
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- System Reset button
|
LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
|
Expansion Slots |
PCI-Express | - 3x PCI-E 3.0 x16 slots(3x GPU/Xeon Phi cards optional)
- 1x PCI-E 3.0 x8 (in x16) Low-Profile slot
|
|
Drive Bays |
Hot-Swap | 4x 2.5" Hot-swap drive bays |
|
System Cooling |
Fans | 10x Counter rotating fans with optimal fan speed control |
|
Power Supply |
1000W/1600W 1U Redundant Power Supply |
AC Input | - 1000W @ 100-127V, 12.9A Max., 50-60Hz
- 1600W @ 200-240V, 9.5A Max., 50-60Hz
|
DC Output | - 1000W: +12V/82A; +12Vsb/2A
- 1600W: +12V/132A; +12Vsb/2A
|
Certification | Platinum Level (Cert. in progress) |
|
PC Health Monitoring |
CPU | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
- CPU core 6-Phase-switching voltage regulator
|
FAN | - Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
Other Features | SDDC Support |
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|