| |
Product SKUs |
| SYS-1027GR-TRFT | SuperServer 1027GR-TRFT (Black) |
| |
Motherboard |
| Super X9DRG-HTF |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600 and E5-2600 v2 family?
- (up to 130 W TDP)
|
| Note | ? BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory |
| Memory Capacity | - 8x 240-pin DDR3 DIMM sockets
- Up to 512 GB DDR3 ECC LRDIMM
- Up to 256 GB DDR3 ECC registered memory (RDIMM)
- Up to 48 GB DDR3 ECC and non-ECC UDIMM
|
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors
- (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Graphics | Matrox G200eW |
| |
Input / Output |
| SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 2x SATA 2.0 ports (3 Gb/s)
|
| LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 2x USB 2.0 ports |
| Video | 1x VGA Connector |
| Keyboard/Mouse | 1x PS/2 Keyboard/Mouse port |
| Serial Port | 1x Serial header |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
- UEFI
- RTC (Real Time Clock) Wakeup
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-118GQ-R1800B |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 31" (787mm) |
| Gross Weight | 48 lbs (21.8 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED / Fan fail LED / UID LED
|
| |
Expansion Slots |
| PCI-Express | - 3x PCI-E 3.0 x16 slots
- (support GPU/Xeon Phi cards)
- 1x PCI-E 3.0 x8 (in x16) Low-Profile slot
|
| |
Drive Bays |
| Hot-Swap | 4x 2.5" Hot-swap drive bays |
| |
System Cooling |
| Fans | 10x Counter rotating fans with optimal fan speed control |
| |
Power Supply |
| 1800W (1+1) Redundant 1800W power supply with PMBus |
| AC Input | - 1000 W Output @ 100-120 V, 12-10 A, 50-60 Hz
- 1200 W Output @ 120-140 V, 12-10 A, 50-60 Hz
- 1800W Output @ 200-240V, 10-8.5A, 50-60Hz
|
| DC Output | - 1000 W: +12 V / 84 A; +5 V sb / 4 A
- 1200 W: +12 V / 100 A; +5V sb / 4 A
- 1800W: +12V/150A; +5Vsb/4A
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores,+1.5 V, +3.3 V, +5 V, +12 V, +5 Stdby, +3.3 Stdby, VBAT, Memory voltages.
- CPU core 6-Phase-switching voltage regulator
|
| FAN | - Total of ten 4-pin PWM fans
- 10x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 10x Fan Connectors
- PSU I²C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
|
| LED | - Power Fail / Overheat LED
- Supsend-State Indicator LED
- UID LED
|
| Other Features | SDDC Support |
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
