| |
Product SKUs |
| SYS-1026T-M3 | SuperServer 1026T-M3 (Black) |
| |
Motherboard |
| Super X8DTL-3 |
| |
Processor/Cache |
| CPU | - Dual 1366-pin LGA Sockets
- Supports up to two Intel 64-Bit Xeon processor(s) of the same type below:
- Intel Xeon processor X5600/E5600/L5600 Series (Westmere) 40 W - 95 W
- Intel Xeon processor X5500/E5500/L5500 Series (Nehalem-EP) 38 W - 95 W
|
| QPI | Up to 6.4 GT/s |
| |
System Memory |
| Memory Capacity | - 6x 240-pin DIMM sockets
- Supports up to 48 GB** 1333 / 1066 / 800 MHz DDR3 ECC registered memory
- Supports up to 24 GB 1333 / 1066 / 800 MHz DDR3 ECC / Non ECC unbuffered memory
- Memory Mirroring supported
|
| Memory Type | 1333 / 1066 / 800MHz ECC registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | |
| Memory Voltage | 1.5 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel x4 and x8 Single Device Data Correction (SDDC)
|
| |
On-Board Devices |
| Chipset | - Intel 5500 (Tylersburg) chipset
- ICH10R + IOH-24D
|
| SAS | - LSI SAS1068E
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| SATA | - Intel ICH10R SATA 3.0 Gb/s controller
- RAID 0, 1, 5, 10 support
|
| Graphics | Matrox G200eW |
| Super I/O | Winbond 83827HF chip |
| |
Input / Output |
| SAS | 8x SAS / SATA ports |
| Serial ATA | - Six Serial ATA ports
- Six SATA hard drives supported
|
| LAN | 2x RJ45 LAN ports |
| USB | - 2x USB rear ports
- 1x USB on-board
- 2x USB internal headers
- Total 6x USB 2.0 Compliant
|
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | - 1x Fast UART 16550 serial port
- 1x Fast UART 16550 serial header (Option)
|
| |
System BIOS |
| BIOS Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-113MTQ-560CB |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 20" (508 mm) |
| Gross Weight | 10 lbs (4.5 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- HDD activity LED
- 2x Network activity LEDs
|
| |
Expansion Slots |
| PCI-Express | 1x (x8) PCI-E 2.0 slot |
| |
Drive Bays |
| Hot-Swap | 8x 2.5" Hot-swap SAS / SATA drive bays |
| |
SAS / SATA Backplane |
| 1x SAS / SATA Backplane |
| |
System Cooling |
| Fans | - 4x 40x28 mm high-efficiency fans
- 6x fans maximum
|
| |
Power Supply |
| 560 W AC to DC power supply w/ PFC |
| AC Voltage | 100-240 V, 50-60 Hz, 6.5-2.6 A |
| +5 V | 15 A |
| +5 V standby | 2 A |
| +12 V | 46.5 A |
| -12 V | 0.5 A |
| +3.3 V | 15 A |
| Certification | Silver Certified |
| |
PC Health Monitoring |
| CPU | - Monitors for CPU cores, +1.8 V, +3.3 V, +5 V, +12 V, +3.3 V Standby, +5 V Standby, VBAT, HT, Memory, chipset voltages.
- 4-Phase-switching voltage regulator
|
| FAN | - Total of six fan headers supporting up to 6 fans
- Six 4-pin fan headers
- 6x fans with tachometer status monitoring
- Supports 3-pin fans (w/o speed control)
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- Thermal Control for 6x fan connectors
- PECI
|
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10° to 35 °C (50° to 95 °F)
- Non-operating temperature: -40° to 70 °C (-40° to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5 to 95% (non-condensing)
|
0 Articoli
