|
Product SKUs |
MBD-H8DMT-F | H8DMT-F (Full IPMI support) |
|
Physical Stats |
Form Factor | Proprietary |
Dimensions | 16.4" x 6.5" (41.6cm x 16.5cm) |
|
Processor/Chipset |
CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
|
| Two Hyper-Transport links between the CPUs |
Chipset | nVIDIA MCP55 Pro |
- CPU-integrated NB functions, including DRAM controller and
- Hyper-Transport links
|
1 | Note: SE processors not recommended for 1U chassis |
|
System Memory |
Memory Capacity | - Eight 240-pin DIMM sockets
- Supports up to 64GB DDR2 800/667/533 MHz memory
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- For Single CPU: Memory must be populated in CPU1 DIMMS only
- Dual channel memory bus
|
Memory Type | DDR2 800/667/533 MHz (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
Memory Voltage | 1.8 V only |
|
On-Board Devices |
SATA | - nVidia MCP55-Pro SATA2 3.0Gbps Controller
- 4x SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD support
|
IPMI | - Winbond WPCM450 BMC IPMI v2.0 support (Intelligent Platform Management Interface)
- IPMI 2.0 with dedicated LAN support
|
Network Controllers | - Intel Zoar (82575) Dual-port Gigabit Ethernet controller with VMDq support
- Support 10/100/1000BASE-T link speeds, 2x RJ45 ports
|
Graphics | Matrox G200 16MB DDR2 |
Super I/O | Winbond 83627DHG |
|
Input / Output |
SATA | Four SATA ports |
LAN | 2x RJ45 LAN ports |
USB | - 2x USB rear ports
- 2x USB internal headers
- 2x USB internal ports (Type A)
- Total of 6 USB 2.0 Compliant ports
|
VGA | 1x VGA Port |
Serial Port | 2x Fast UART 16550 serial ports (1x Header, 1x Port) |
|
Expansion Slots |
PCI-Express | One PCI-Express (x16) Slot |
|
Chassis ( Optimized for H8DMT-F ) |
1U Chassis | - CSE-809T-780B
- Please use: Air-shroud (MCP-310-80903-0B) & CPU heat sink (SNK-P0022+) Both are sold separately
|
2U Chassis | CSE-827H-R1400B |
|
Server(s) ( with H8DMT-F ) |
Model(s) | AS -2021TM-BTRF |
|
System BIOS |
BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 1.0/2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
|
Management |
Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
- NMI
|
Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
|
|
PC Health Monitoring |
CPU | - Monitors CPU Core Voltages, +3.3V, +12V, +5V Standby, 1.5V, VBAT, VDD, HyperTransport Link voltage, memory voltage, Chipset voltage
- CPU switching voltage regulator
|
FAN | - Total of Four fan headers supporting up to 4 fans
- 4x fans with tachometer status monitoring
- Status monitor for speed control
- Status Monitor for on / off control
- Low noise fan speed control
|
Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 4x Fan Status
- I²C temperature sensing logic
|
LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
|
Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant 6/6 |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
|
OS compatibility |
Please see our OS Compatibility Chart |