| |
Product SKUs |
| MBD-H8DME-2-O | H8DME-2 (Standard Retail Pack) |
| MBD-H8DME-2-B | H8DME-2 (Bulk Pack) |
| |
Physical Stats |
| Form Factor | Extended ATX |
| Dimensions | 12" x 13.05" (30.5cm x 33.2cm) |
| |
Processor/Chipset |
| CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors
- HT3.0 Link support ^
|
| Two Hyper-Transport links between the CPUs |
| Chipset | - nVidia MCP55 Pro
- NEC uPD720400
|
| |
System Memory |
| Memory Capacity | - Sixteen 240-pin DIMM sockets
- Support up to 128GB DDR2 800/667/533 MHz memory *
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
|
| Memory Type | DDR2 800/667/533/400 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIM1U(+) R 3.00) **
- RMM (Remote Management Module)
- (Card not included)
|
| Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| VGA | - ATI ES1000 Graphics Controller
- 16MB Graphics & VGA port
|
| Super I/O | Winbond 83627HF |
| |
Input / Output |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | 2 RJ45 LAN ports |
| USB | - FUCI
- Up to 6 USB Ports 2.0 Compliant, 1.1 Compatible
- 2 Rear Ports
- 4 Internal Headers
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1 serial port header
|
| Others | 1 SATA DOM power connector |
| |
Expansion Slots |
| PCI-Express | - 2 x8 PCI-e slots
- 1 SEPC (Supermicro extended Power Connector) slot for 2U active riser cards w/ a power extension (i.e. CSE-RR2UE-AX)
|
| PCI-X | - 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 100MHz PCI-X (3.3V) slot
|
| IPMI | IPMI 2.0 expansion slot |
| |
Chassis ( Optimized for H8DME-2 ) |
| 2U Chassis | - CSE-213A-R900LPB
- CSE-216A-R900LPB
|
| Important Chassis Notes | To ensure system stability, a 550W (minimum) ATX power supply [ 4-pin (+12V), 8-pin (+12V) and 24-pin are required] |
| |
Server(s) ( with H8DME-2 ) |
| Model(s) | - AS -1021M-T2+V
- AS -2021M-T2R+V
- AS -4021M-T2R+
|
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
Management |
| Software | - Optional IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
- Watch Dog
|
| Power Configurations | - ACPI Power Management
- Wake-On-Ring (WOR) headert
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +1.5V, +3.3V, +5V, ±12V, 5V Standby, HyperTransport Link voltage 1.2V, memory voltage 1.8V, VBAT
- CPU switching voltage regulator
|
| FAN | - Up to 8-fan status tachometer monitoring
- Up to six 3-pin & two 4-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
| |
OS compatibility |
| Please see our OS Compatibility Chart |
| |
Regulatory |
| FCC | Passed to meet FCC standard requirement |
0 Articoli
