|
Product SKUs |
SYS-F628R3-RC0BPT+ | SuperServer F628R3-RC0BPT+ (Black) |
|
Motherboard |
Super X10DRFR-NT |
|
Processor/Cache |
CPU | - Intel® Xeon® processor E5-2600 v4/
- v3 family
- (up to 145W TDP)
- *
- Dual Socket R3 (LGA 2011)
|
Cores / Cache | Up to 22 Cores / Up to 55MB Cache |
System Bus | QPI up to 9.6 GT/s |
Note | * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
System Memory |
Memory Capacity | - 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
|
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | - RDIMM:
- 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64 GB, 32 GB
- 3DS LRDIMM: 128GB
|
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
|
On-Board Devices |
Chipset | Intel® C612 chipset |
SAS | - SAS 3.0 (12Gbps) via LSI 3008
- HBA/SW RAID 0, 1, 10 support
|
SATA | SATA 3.0 (6Gbps) w/ RAID 0, 1, 5, 10 |
IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- ASPEED AST2400 BMC
|
Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
Graphics | ASPEED AST2400 |
|
Input / Output (per Node) |
SAS | 8 SAS3 (12Gbps) ports |
LAN | - 2 RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
|
USB | 2 USB 3.0 ports |
VGA | 1x VGA port |
|
Management |
Software | - SuperDoctor® 5
- Watch Dog
- NMI
- IPMI 2.0
- SUM and SSM
|
Power Configurations | - ACPI / APM Power Management
- Power-on mode for AC power recovery
|
|
Chassis |
Form Factor | 4U Rackmount |
Model | CSE-F424AS-R1K28BP |
|
Dimensions and Weight |
Width | 17.63" (448mm) |
Height | 6.96" (177mm) |
Depth | 29" (737 mm) |
Package | 28.3" (W) x 15.0" (H) x 42.4" (D) |
Weight | - Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
|
Available Colors | Black |
|
Front Panel |
Buttons | - Power On/Off button
- UID button
|
LEDs | - Power status LED
- Hard drive activity LED
- 2 Network activity LEDs
- Information LED (UID, Fan failure, Overheat)
|
|
Expansion Slots (per node) |
PCI-Express | - 1x PCI-E 3.0 x16 (LP) + 1x Micro LP
- MicroLP Adapter Matrix (Networking options)
|
|
Drive Bays (per node) |
Hot-Swap | - (6+2) 3.5" Hot-swap SAS3 HDD trays
- 8 SAS3 or 6x SAS3 + 2 NVMe (optional)
- Note: NVMe support requires 2 CPUs installed
|
|
Backplane |
- 1 SAS/SATA backplane
- 1 SAS/SATA/NVMe hybrid (2 slots)
|
|
System Cooling (per node) |
Fans | 2x 8cm 11k RPM middle fans |
|
Power Supply |
1280 W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 |
AC Input | - 1000W Output @ 100-140V, 8-12A, 50-60Hz
- 1280W Output @ 180-240V, 6-8A, 50-60Hz
|
DC Output | - 1000 W: +12 V / 83 A; +5 V sb / 4 A
- 1280 W: +12 V / 106.7 A, +5V sb / 4 A
|
Certification | Platinum Certified |
|
System BIOS |
BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
|
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|