| |
Product SKUs |
| SYS-F617H6-FTPTL+ | SuperServer F617H6-FTPTL+ |
| |
Motherboard |
| Super X9DRFF-7TG+ |
| |
Processor/Cache |
| CPU | - Dual Socket R (LGA 2011)
- Intel Xeon processor E5-2600 and E5-2600 v2 family
- (up to 135 W TDP *)
- * Please contact your Supermicro sales representative for additional details
|
| Note | BIOS version 3.0 or above is required |
| Cache | Up to 30 MB |
| System Bus | QPI up to 8 GT/s |
| |
System Memory (per node) |
| Memory Capacity | - 16x 240-pin DDR3 DIMM sockets
- Up to 1 TB DDR3 ECC LRDIMM
- Up to 512 GB DDR3 ECC registered memory (RDIMM)
- Up to 128 GB DDR3 ECC unbuffered memory (UDIMM)
|
| Memory Type | 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| Chipset | Intel C602 chipset |
| AHCI SATA | - SATA 2.0 3 Gb/s with RAID 0, 1, 5, 10
- SATA 3.0 6 Gb/s with RAID 0, 1
|
| SAS | - SAS-2 (6 Gb/s) via LSI 2308
- SW RAID 0, 1, 10 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Nuvoton WPCM450 BMC
|
| Network Controllers | - Intel X540 Dual port 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
|
| Graphics | Matrox G200eW |
| |
Input / Output (per Node) |
| AHCI SATA | - 2x SATA 3.0 ports (6 Gb/s)
- 4x SATA 2.0 ports (3 Gb/s)
- Note: 2 of the 4 SATA 2.0 ports are for optional 2x 2.5" HDDs
|
| SAS | 8x SAS-2 ports (6 Gb/s) |
| LAN | - 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB | 2x USB 2.0 ports (rear) |
| VGA | 1x VGA port |
| Serial Port / Header | 1x Fast UART 16550 port |
| |
Chassis |
| Form Factor | 4U Rackmount |
| Model | CSE-F414IS-R1K62B |
| |
Dimensions |
| Width | 17.63" (448mm) |
| Height | 6.96" (177mm) |
| Depth | 35" (889mm) |
| Package | 25.6" (W) x 11.8" (H) x 48.0" (D) |
| Weight | - Net Weight: 200 lbs (90.71 kg)
- Gross Weight: 240 lbs (108.86 kg)
|
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power status LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| |
Expansion Slots (per node) |
| PCI-Express | - 1x PCI-E 3.0 x8 Low-Profile via riser card
- 1x PCI-E 2.0 x4 Low-Profile via riser card
|
| |
Drive Bays (per node) |
| Fixed | - 8x Fixed 3.5" SAS/SATA HDD trays
- 4x Fixed 3.5" SATA HDD trays
- Additional 2 Fixed 2.5" SATA HDD Bays optional
|
| |
System Cooling |
| Fans | 8x 8cm heavy duty fans with air shroud and PWM fan speed control |
| |
Power Supply |
| 1620 W high-efficiency redundant power supply w/ PMBus |
| AC Input | - 1000 W Output @ 100-120 V, 12-10 A, 50-60 Hz
- 1200 W Output @ 120-140 V, 12-10 A, 50-60 Hz
- 1620 W Output @ 180-240 V, 10.5-8 A, 50-60 Hz
|
| DC Output | - 1000 W: +12 V / 84 A; +5 V sb / 4 A
- 1200 W: +12 V / 100 A; +5V sb / 4 A
- 1620 W: +12 V / 150 A; +5 V sb / 4 A
|
| Certification | Platinum Certified |
| |
System BIOS |
| BIOS Type | 128 Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
