| |
Product SKUs |
| AS-4021GA-62R+F | A+ Server 4021GA-62R+F (Black) |
| |
Motherboard |
| Super H8DA6+-F |
| |
Processor/Chipset |
| CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core / Quad-Core AMD Opteron™ 2000 Series processors**
- HT3.0 Link support
|
| Chipset | Dual AMD chipset SR5690 + SP5100 |
| |
System Memory |
| Memory Capacity | - Sixteen 240-pin DIMM sockets
- Support up to 128GB DDR2 800/667/533 MHz memory
- Dual channel memory bus
- Single or Dual (recommended) channel memory support
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type | DDR2 800/667/533 MHz Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| SATA | AMD SP5100 (RAID 0, 1, 10) |
| SAS | - LSI 2008 8 port SAS2 controller
- RAID 0, 1, 10; RAID 5 Optional
- Optional: AOC-SAS2-RAID5-KEY RAID 5 support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers | - Intel® 82576 controller, Dual-Port Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Winbond® 83627DHG chip |
| |
Input / Output |
| SATA | 6x SATA2.0 (3Gb/s) Ports |
| SAS | Integrated LSI 2008 SAS2 controller support up to 8 SAS / SATA drives |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB | - 6x USB 2.0 ports
- 2x Rear / 2x header / 2x type A
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x serial port header
|
| |
Expansion Slots |
| PCI-Express | - 4x PCI-e 2.0 x16
- 2x PCI-e 2.0 x4 (in x8 slot)
|
| PCI | 1x PCI 32-bit 33MHz slot |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | - Tower / 4U Rackmountable
- Optional Rackmount Kit
- (MCP-290-00001-00)
|
| Model | SC747TG-R1400B-SQ |
| |
Dimensions |
| Height | 7.0" (178 mm) |
| Width | 17.8" (452mm) |
| Depth | 29.4" (746mm) |
| Gross Weight | 87 lbs (39.5kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - LED Power On/Off button
- System Reset button
|
| LEDs | - Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports | 2x Front side USB Ports |
| |
Drive Bays |
| Hot-Swap | 8x 3.5" Hot-swap SAS/SATA Drive Bays |
| Peripheral Bay(s) | - 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- rotates 90° for Rackmount
- 1x 3.5" fixed drive bay
|
| |
SAS / SATA Backplane |
| SAS / SATA Hard Drive Backplane with SES2 |
| |
System Cooling |
| Fans | - 2x 5000 RPM Hot-swap Cooling Fans
- 1x 5000 RPM Hot-swap Rear Exhaust Fan
|
| |
Power Supply |
| 1400 W high-efficiency (1+1) redundant power supply with PMBus |
| AC Input | - 1100 W Output @ 100-140 V, 13.5-9.5 A, 50-60 Hz
- 1400 W Output @ 180-240 V, 9.5-7.0 A, 50-60 Hz
|
| DC Output | - 1100 W: +12 V / 92 A; +5V sb / 4 A
- 1400 W: +12 V / 116 A; +5 V sb / 4 A
|
| With Distributor | - +5 V: 30 A
- +3.3V: 24 A
- -12V: 0.6 A
|
| Certification | Gold Certified |
| |
Management |
| Software | - IPMI (Intelligent Platform Management Interface) 2.0
- Super Doctor III
|
| Power Configurations | - ACPI Power Management
- Wake-On-LAN (WOL) header
- Keyboard wakeup from soft-off
- Power-on mode control for AC power loss recovery
|
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, memory, chipset
- CPU switching voltage regulator
|
| FAN | - Up to 8-fan status tachometer monitoring
- Up to eight 4-pin Pulse Width Modulated
- (PWM) fan connectors
- Status monitor for speed control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal control for 8x Fan connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
0 Articoli
