| |
Product SKUs |
| AS-1022TC-TF | A+ Server 1022TC-TF (Black) |
| |
Motherboard |
| Super H8DCT-F |
| |
Processor/Chipset |
| CPU | - Dual 1207-pin Socket C32
- Supports two 8/6/4-Core ready AMD Opteron™ 4000 Series processors
- HT3.0 Link support
|
| Chipset | AMD SR5670 + SP5100 Chipset |
| |
System Memory (per node) |
| Memory Capacity | - 12 DIMM sockets
- Support up to 192GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs
- Dual channel memory bus
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- See Detailed Memory Support Matrix
|
| Memory Type | DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32 GB, 16 GB, 8 GB, 4 GB, 2 GB, 1 GB |
| Memory Voltage | 1.35V or 1.5V |
| |
On-Board Devices (per node) |
| SATA | AMD SP5100 (RAID 0, 1) |
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Winbond® WPCM450 BMC
|
| Network Controllers | - Intel® 82576 controller, Dual-Port
- Gigabit Ethernet
- 10/100/1000BASE-T support
|
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Winbond® W83527 chip |
| |
Input / Output (per Node) |
| SATA | 4x SATA (3Gb/s) ports |
| LAN | - 2 RJ45 LAN ports
- 1 RJ45 Dedicated LAN supports IPMI
|
| USB | - 4x USB 2.0 ports
- 2x Rear, 1x header (2 ports)
|
| VGA | 1x VGA port |
| Serial Ports | 1x Fast UART 16550 serial port |
| |
Expansion Slots (per node) |
| PCI-E | 1 Low Profile PCI-E Gen2.0 x16 expansion slot |
| |
System BIOS |
| BIOS Type | 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | CSE-808T-920B |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (705 mm) |
| Gross Weight | 39 lbs (17.7 kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
|
| Ports | None |
| |
Drive Bays (per node) |
| Hot-Swap | - 2x 3.5" SATA hard drive bays
- Enterprise SATA HDD only recommended
|
| |
System Cooling |
| Fans | 6x counter-rotating PWM fans w/ Optimal Fan Speed Control |
| |
Power Supply with Power Distributor |
| 920 W high-efficiency (94+%) power supply with PMBus |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 A |
| DC Output | - 4 A @ +5 V Standby
- 75 A @ +12 V
|
| Certification | Platinum Certified |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
- Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
- CPU 4-phase Switching Voltage Regulator
|
| FAN | - Total up to five 4-pin fan headers
- 6 Fan Status Tachometer monitoring
- Status Monitor for Speed Control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- I²C temperature sensing logic
|
| LED | - CPU / Overheat LED
- Supsend-State Indicator LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Header
- Chassis Intrusion Detection
- Chipkill Support
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
