Consulting & ordering +49 4181 23577-10
Server specialist since 1999
Directly from Value-Added Distributor
PLEASE NOTE!

From 08. July 2019 we can be reached at the following telephone number:

+49 4181 2357780

You are here: Homepage > Shop > > Supermicro AS-1012G-MTF Server Barebone

Lingua:    


Supermicro AS-1012G-MTF Server Barebone

19" 1U Server Barebone, Single Opteron 6100 & 6200

Supermicro AS-1012G-MTF Server Barebone
Picture may differ from original product
Numero Articolo.:
AS-1012G-MTF

Numero Produttore.:

AS-1012G-MTF


Non più disponibile

Supermicro

Descrizione

Produttore: Supermicro

Supermicro AS-1012G-MTF Server Barebone

  • Single AMD Opteron™ 6000 series (6300P* ready) processors (Socket G34) 16/12/8/4-Core ready; HT3.0 Link support
  • Up to 256GB DDR3 1600MHz ECC Registered DIMM; 8x DIMM sockets
  • 1x PCI-E 2.0 x8 in x16 slot
  • Dual-port GbE LAN Controller, 4x USB 2.0 ports, 1x dedicated LAN for system management (IPMI 2.0)
  • 4x Hot-swap SATA Drive Bays
  • 350W High-efficiency Power Supply Gold Certified
 

Product SKUs

AS-1012G-MTFA+ Server 1012G-MTF (Black)
 

Motherboard

Super H8SGL-F
 

Processor/Chipset

CPU
  • Single 1944-pin Socket G34
  • Supports one 16/12/8/4-Core ready AMD Opteron™ 6000 Series processors
  • HT3.0 Link support
ChipsetAMD chipset SR5650/SP5100
NoteSupports 6000 processors with Max ACP 80W (TDP 115W)
 

System Memory

Memory Capacity
  • Eight DIMM sockets
  • Support up to 256GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 8 DIMMs
  • Quad channel memory bus
Memory TypeDDR3 1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes1GB, 2GB, 4GB, 8GB, 16GB, 32GB
Memory Voltage1.35V or 1.5V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 

On-Board Devices

SATAAMD SP5100 (RAID 0, 1, 10)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • Winbond® WPCM450 BMC
Network Controllers
  • Two Intel® 82574L controller, Dual-Port Gigabit Ethernet
  • 10/100/1000BASE-T support
VGAMatrox G200 16MB DDR2
Super I/OWinbond® W83527 chip
 

Expansion Slots

PCI-E/PCI1x PCI-E 2.0 x16 slot
 

Input / Output

SATA4x SATA2.0 (3Gb/s) Ports
LAN
  • 2 RJ45 LAN ports
  • 1 RJ45 Dedicated LAN supports IPMI
USB
  • 8x USB 2.0 ports
  • 2x Rear, 4x header, and 2x TypeA
VGA1x VGA port
Keyboard / MousePS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x serial port header
 

System BIOS

BIOS Type16Mb SPI Flash ROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • DMI 2.3
  • PCI 2.2
  • ACPI 2.0
  • USB Keyboard Support
  • SMBIOS 2.3
 

Chassis

Form Factor1U Rackmount
ModelSC813MTQ-350C
 

Dimensions

Height1.7" (43 mm)
Width17.2" (437mm)
Depth19.8" (503 mm)
Packaging23.4" (W) x 8.5" (H) x 29.7" (L)
Gross Weight31 lbs (14.1 kg)
Available ColorsBlack
 

Front Panel

Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • 2x Front USB Ports
  • 1x Serial COM Port
 

Drive Bays

Hot-Swap
  • 4x 3.5" Hot-swap SATA drive bays
  • Enterprise SATA HDD only recommended
 

Peripheral Drives

DVD-ROMSlim DVD-ROM drive
 

Backplane

1x 1 U SAS / SATA Backplane
 

System Cooling

Fans4x 4 cm 12,500 RPM PWM fans
 

Power Supply

350 W AC power supply w/ PFC
AC Voltage100-240 V, 50-60 Hz, 4.2-1.8 A
+5 V18 A
+5 V standby3 A
+12 V29 A
+3.3 V15 A
CertificationGold Certified
 

PC Health Monitoring

CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT
  • Monitor for HyperTransport voltage 1.2V, DDR termination 1.25V
  • CPU 4-phase Switching Voltage Regulator
FAN
  • Total up to five 4-pin fan headers
  • 5 Fan Status Tachometer monitoring
  • Status Monitor for Speed Control
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • I²C temperature sensing logic
LED
  • CPU / Overheat LED
  • Supsend-State Indicator LED
  • +5 V Standby Alert LED
Other Features
  • Chassis Intrusion Header
  • Chassis Intrusion Detection
  • Chipkill Support