| |
Product SKUs |
| AS-2041M-32R+B | A+ Server 2041M-32R+B (Black) |
| |
Motherboard |
| Super H8QM3-2 |
| |
Processor/Chipset |
| CPU | - Quad 1207-pin Socket F
- Supports up to four Six-Core AMD Opteron™ 8000 Series (Socket F) processors
- HT3.0 Link support
|
| Chipset | - nVidia MCP55 Pro
- IO 55
- NEC uPD720400
|
| |
System Memory |
| Memory Capacity | - Thirty-two 240-pin DIMM sockets
- Supports up to 256 GB DDR2 800/667/533/400 MHz memory
- Single or Dual (recommended) channel memory support
- For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type | DDR2 800/667/533/400MHz* Reg. ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB ** |
| Memory Voltage | 1.8 V only |
| Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
On-Board Devices |
| SAS | - LSI SAS 1068E **
- RAID 0, 1, 10 support
- (Optional: AOC-IButton68) RAID 5 support
|
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA2 Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 0+1, 5 JBOD Support
|
| IPMI | - Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot
- (Optional: AOC-SIMLC R 3.00)
- (Optional: AOC-SIM1U+ R 3.00)
- RMM (Remote Management Module)
- (Card not included)
- Note: Dedicated LAN connection is required for KVM-over-LAN function.
|
| Network Controllers | - Intel® 82546GB Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| Super I/O | Winbond 83627HG |
| VGA | ATI ES1000 Graphics Controller |
| |
Input / Output |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100 / 133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | 2 RJ45 LAN ports |
| USB | - Up to 4 USB Ports 2.0/1.1 Compliant
- 2 Rear Ports
- 2 Internal Headers
|
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1x Header
|
| VGA | 1x VGA port |
| |
System BIOS |
| BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
- SST 49LF080A BIOS Chip
|
| BIOS Features | - Plug and Play (PnP)
- DMI 2.3
- PCI 2.2
- ACPI 2.0/1.0
- USB Keyboard Support
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 2U Rackmount |
| Model | SC828TQ-R1200LPB |
| |
Dimensions |
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (708mm) |
| Gross Weight | 69 lbs (31.3kg) |
| Available Colors | Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Failure LED
- Power fail LED
|
| Ports | 2x USB Ports + DB9 COM Port |
| |
Expansion Slots |
| PCI-Express | - 2 x16 PCI-e Slots
- 1x (x8) PCI-e Slot
- 1 x4 PCI-e Slot (Using x8 Slot)
|
| PCI-X | - 1 64-bit 133 MHz PCI-X (3.3V) slot
- OR 1 SIMLC Slot
|
| |
Drive Bays |
| Hot-Swap | - 6 x 3.5" SATA Hot-swap drive trays
- Supports up to 6x SATA hard drives
|
| |
Peripheral Drives |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM Drive |
| Floppy | Slim 1.44MB Floppy Drive (Optional) |
| |
SAS / SATA Backplane |
| 1x 2U SAS / SATA backplane with Enclosure Management (SGPIO) |
| |
System Cooling |
| Fans | 6x 80 mm 6500 RPM fans |
| Shroud | 1x Air Shroud |
| |
Power Supply |
| 1200 W (1 + 1) Redundant high-efficiency power supply w/ PFC |
| +5 V standby | 4 A |
| +12 V | 74 A |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, +12V, +5V Standby, VBAT.
- CPU 5-Phase-switching voltage reulator
|
| FAN | - Total up to 9-fan status tachometer monitoring
- Up to nine 3-pin fan headers
- Status monitor for speed control
- Support 3-pin fans with fan-speed control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- PC Temperature Sensing Logic
|
| LED | - CPU / System Overheat LED
- +5 V Standby Alert LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
