| |
Product SKUs |
| AS-1021M-UR+V | A+ Server 1021M-UR+V (Silver) |
| AS-1021M-UR+B | A+ Server 1021M-UR+B (Black) |
| |
Motherboard |
| Super H8DMU+ |
| |
Processor/Chipset |
| CPU | - Dual 1207-pin Socket F
- Supports up to two Six-Core AMD Opteron™ 2000 Series (Socket F) processors
- 1 MB Cache
- HT3.0 Link support
|
| Chipset | nVIDIA MCP55Pro |
| |
System Memory |
| Memory Capacity | - Sixteen 240-pin DIMM sockets
- Supports up to 128GB DDR2 800/667/533/400 MHz memory
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
- Dual channel memory bus
|
| Memory Type | DDR2 800/667/533/400 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB, 4 GB |
| Memory Voltage | 1.8 V only |
| |
On-Board Devices |
| SATA | - nVidia MCP55 Pro SATA2 3.0Gbps Controller
- 6 SATA Ports
- nVidia Host RAID 2.0
- SATA RAID 0, 1, 0+1, 5, JBOD Support
|
| IPMI | - Intelligent Platform Management Interface v.2.0 (Optional: AOC-SIMSO(+) R 3.00)
- RMM (Remote Management Module)
- (Card not included)
- For dedicated LAN, CBL-0177L must be used on left full-size slot. (Cable not included)
|
| Network Controllers | - nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T; RJ45 output
|
| VGA | ATI ES1000 Graphics Controller |
| Super I/O | Winbond 83627HF |
| |
Input / Output |
| SATA | 6 SATA2 ports |
| IDE | - Single EIDE channel support up to two UDMA IDE devices
- Supports UDMA Mode 5
- Supports PIO Mode 4
- Supports ATA 100/133
|
| Floppy | 1 Floppy port; 1.44 MB support |
| LAN | 2 RJ45 LAN ports |
| USB | - FUCI
- Up to 6 USB Ports 2.0 Compliant
- 2 Rear Ports
- 4 Internal Headers
|
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | - 1x Fast UART 16550 serial port
- 1 serial port header
|
| Others | 1 UID |
| |
System BIOS |
| BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 2.0
- BIOS Rescue Hot Keys
- USB Keyboard Support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| |
Chassis |
| Form Factor | 1U Rackmount |
| Model | SC815TQ-R650U |
| |
Dimensions |
| Height | 1.7" (43 mm) |
| Width | 17.2" (437mm) |
| Depth | 25.6" (650mm) |
| Gross Weight | 40 lbs (18.1 kg) |
| Available Colors | Silver, Black |
| |
Front Panel |
| Buttons | - Power On/Off button
- System Reset button
- UID button
|
| LEDs | - Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- Universal Information (UID) LED
|
| Ports | - 2x USB & DB9 COM port tray
- (optional - in place of floppy drive)
|
| |
Expansion Slots |
| Left slots | - 1 Universal I/O (UIO) Slot(Full-height / Full-length)
- 1 PCI-express x8 Slot (Full-height / Full-length)
|
| |
Drive Bays |
| Hot-Swap | 4 x 3.5" Hot-swap SAS / SATA drive bays |
| |
SAS Backplane |
| 1U SAS / SATA Backplane w/ AMI 9071 chip |
| |
Peripheral Drives |
| DVD-ROM | Slim 8x DVD, 24x CD, DVD-ROM drive |
| |
System Cooling |
| Fans | 4x 4cm counter-rotating fans |
| |
Power Supply |
| 650W AC power supply w/ PFC |
| AC Voltage | 100 - 240 V, 60-50 Hz, 8-4 A |
| +5 V standby | 3 A |
| +12 V | 54 A |
| With Power Distributor | - +5 V: 25 A
- +3.3 V: 12 A
- -12V: 0.6 A
|
| +5 V | 25 A |
| +3.3 V | 12 A |
| -12 V | 0.5 A |
| |
PC Health Monitoring |
| CPU | - Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage
- CPU 4-Phase-switching voltage reulator
|
| FAN | - Total up to 8-fan status tachometer monitoring
- Up to two 4-pin and six 3-pin fan headers
- Status monitor for speed control
- Stauts monitor for on/off control
- Low noise fan speed control
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- I²C temperature sensing logic
|
| LED | - CPU / System Overheat LED
- Suspend-State Indicator LED
- +5 V Standby Alert LED
- UID/Remote LED
|
| Other Features | - Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Specifications | - Operating Temperature: 10 °C to 35 °C (50 °F to 95 °F)
- Non-operating temperature: -40 °C to 70 °C (-40 °F to 158 °F)
- Operating relative humidity: 8% to 90% (non-condensing)
- Non-operating relative humidity: 5% to 95% (non-condensing)
|
0 Articoli
